Gaskets are designed with vent holes between port and boundary gasket. This ensures that in case of a leak occurring due to gasket failure, the fluids will not cross contaminate but instead will leak to atmosphere giving the operator an indication that gaskets have failed.
Contamination-prevention
Gaskets are designed with vent holes between port and boundary gasket. This ensures that in case of a leak occurring due to gasket failure, the fluids will not cross contaminate but instead will leak to atmosphere giving the operator an indication that gaskets have failed.
Product Range
Our plate heat exchangers have a wide range from 0.23 ft² to 19.81 ft² per plate with nozzle sizes from 3⁄4” to 12/14”. Our plate packs have varied chevron angles to allow the maximum turbulence and velocity for a given pressure drop. Our range of sizes and plate patterns permit the precise optimization of the heat exchanger to meet your process requirements.
Safe operation and high-performance are the benchmarks of our industrial products. These Gasketed PHEs are cooling high-temperature chemical mixtures.
Specifications |
|
Standard plate materials: | SS316, Titanium |
Custom plate materials: | SMO 254, Alloy C276, C22, Nickel 200 |
Standard gasket materials: | Nitrile, EPDM |
Custom gasket materials: | Viton, Butyl, Silicone, Aflas |
Low installation cost: Parallel and counter-current flow connections make installation easy, reducing costs for pipes and valves.
Easy Expansion: Versatile, bolted construction makes future expansion easy, simply by adding plates to increase heat transfer capacity.
Minimal downtime: High-quality materials and careful gasket and heat-transfer plate design provide effective protection from fouling, thus minimizing downtime.
Complete restoration of heat transfer: The heat-transfer area can be readily inspected by disassembling the plates. With suitable maintenance, 100% of performance can be recovered at low cost.
Low energy consumption: Close approach temperatures make it possible to reduce the flow rates needed for heating and cooling, which makes for lower pumping costs.
Readily recyclable materials: Materials used in construction are pure and thus easily recycled with the environmental benefits this ensures.
Low maintenance cost: Glue-free clip-on gaskets ensure fast, easy maintenance, with significant savings in labor costs.
In addition to our Gasketed PHE line, we offer Free-Flow Welded Plate Heat Exchangers (WPHE). These units combine the efficiency of plate heat exchangers with the robustness and flexibility of shell and tube construction. Depending on process requirements and the nature of the fluids, the free flow gap can vary from 3mm to 30mm, making it the best available WPHE in the world for low- to high-fouling liquids. Easy access doors make it possible to clean the process side by hydroblasting, even without dismantling the connection pipe lines.
Flexible length, width and number of heat transfer plates make this a truly custom-built solution. Large openings and connection possibilities make it ideal for condensing duties where the allowable pressure drop is low.